Bang & Olufsen BeoVision 7-32 User Guide - Manual (Page 25)

Changing the Beo4 batteries
When BATTERY appears in the Beo4 display,
it is time to change the batteries in the
remote control.
The Beo4 requires three batteries. We
recommend that you use Alkaline batteries
only (1.5 V – size AAA). Replace the batteries
as shown on this page. Keep a finger on top
of the batteries until the lid is replaced.
When you have replaced the batteries, you
must wait about 10 seconds until TV appears
in the display. The Beo4 remote control is
then ready for use.
Handling discs: Should the disc become soiled by
fingerprints, dust or dirt, it can be wiped clean
with a lint-free, soft, dry cloth. Always wipe in a
straight line from the centre to the edge. Avoid
extreme heat and humidity, and never write on
your discs.
1
2
3
1
2
25