Bang & Olufsen BeoVision 7-32 User Guide - Manual (Page 11)

11
Picture format
Your television always ensures you the best
possible picture. It automatically adapts the
picture so that it fills out as much of the screen
as possible. However, you can always choose
the format you prefer. When you select a
format yourself, the automatic format
selection is deactivated, until you switch to a
different channel or change source.
Press repeatedly to display
FORMAT on Beo4
Press if you want to optimise the
picture, or …
… press the number of the
desired picture format
If you have chosen Format 1 …
Press or to select variations
of this format
If you have chosen Format 1
or Format 2 …
Press or to move the
picture up and down
Press to leave the FORMAT
function
Picture formats to choose from
FORMAT 1 … For standard TV pictures. Three
variations are available: 4:3, 15:9 and Panoramic
view (for the largest picture).
FORMAT 2 … For letter-box pictures. When you
select FORMAT 2, the picture is automatically
adjusted vertically. This ensures that program
names or subtitles – if these appear in the
broadcasted picture – can be seen.
FORMAT 3 … For genuine 16:9 wide-screen
pictures. FORMAT 3 is usually selected
automatically. If this is not the case, you can
select it yourself.
Switch to Home cinema
If a projector is connected, you can use your
Beo4 remote control and move the picture
from the television screen onto a projector
screen for a special occasion or movie.
Press repeatedly to display
FORMAT on Beo4
Press to switch between Home
cinema mode and ordinary TV
mode
Press to leave the FORMAT
function
Note that a projector delay is
part of the projector setup.
LIST
FORMAT
0
EXIT
LIST
FORMAT
GO
1 – 3
EXIT