Bang & Olufsen BeoSystem 4 with Beo4 Getting Started - Manual (Page 21)

In
st
al
la
tio
n a
nd
s
et
ting
up
Ethernet connection
Online guide
Connect your system to the Internet to receive software updates and download Peripheral Unit
Controller (PUC) tables. It is recommended that you set your system to update software automatically.
The online guide includes more information about setup and connection of external equipment.
STAND
For connection of a motorised stand. See the
online guide for calibration of stand.
AERIAL (5V= 50mA)
Aerial input socket for an external aerial/cable TV
network or for an analogue signal.
SATELLITE
Aerial input socket for a digital satellite signal.
Depending on your tuner options, you may have a
satellite socket.
2 x PCMCIA (CA Module)
For insertion of a module and card for access to
coded digital channels. For more information
about compatible card and module combinations,
contact your Bang & Olufsen retailer.
HDMI OUT
For connection of a television screen or projector.
IR / AUTO CONTRAST
For connection of a primary external IR-receiver
enabling remote control operation of a television
screen or projector. Auto contrast is only available
for Bang & Olufsen television screens.
NOT USED
Not used.
We recommend that you connect the system to the Internet to be able to receive
software updates and to download Peripheral Unit Controller (PUC) tables. PUC
tables enable you to operate connected non-Bang & Olufsen products with your
Bang & Olufsen remote control.
21
To protect the mains cable, fasten it with the
enclosed cable bracket and screw.