Bang & Olufsen BeoSystem 4 with Beo4 Getting Started - Manual (Page 20)

Connection panel
Any equipment you connect to the connection panel must be registered in the
SOURCE LIST SETUP menu.
Information
Connect the ~ socket on the connection panel of your system to the wall
outlet. The system is in standby mode and ready to be used.
The supplied plug and mains cord are specially designed for the product. Do
not change the plug, and if the mains cord is damaged, you must buy a new
one from your Bang & Olufsen retailer.
~ – Mains supply
Connection to the mains supply.
PL 1–6 (Power Link)
For connection of external speakers in a surround
sound setup. See the online guide for more
information. Depending on the television screen,
a PL socket, for example PL6, can also be used for
connection of a television screen’s build in centre
speaker.
MONITOR CONTROL
For connection of a Bang & Olufsen television
screen.
PUC 1–3 A+B
For IR control signals to external equipment
connected to an HDMI IN, HDMI OUT or AV IN
socket. Allows you to control non-Bang & Olufsen
equipment with your Bang & Olufsen remote
control.
CTRL (1–2)
For future use.
EXT. IR
For connection of a secondary external IR-receiver.
HDMI IN (1–5)
The High Definition Multimedia Interface allows
you to connect many different video sources, such
as set-top boxes, multimedia players, Blu-ray
players, or a PC.
AV IN
For connection of analogue video equipment.
S/P-DIF IN
Digital audio input socket, for example, a PC.
USB ( )
For connection of a USB device to browse digital
photos, video or music files.
Ethernet* 1
For connection to the Internet. For software
updates, access to WebMedia and PUC
downloads.
1 *Make sure the cable connection between the
product and the router does not exit the building
to avoid contact with high voltage.
Mains cord and plug
CTRL 1 CTRL 2 CTRL 3
PUC 3 A+B PL 1 PL 2 PL 3
EXT IR PUC 1
A+B
CTRL 4
PUC 2
A+B
CTRL 5
NOT
USED
PL 4 PL 5
1 2 3 4 5
HDMI IN
AV
IN
S/P-DIF
IN
5V
0,5A
12V=1.0A
STAND
COMMON INTERFACE
CHIPSIDE
CHIPSIDE
5V=50mA
AERIAL
14/18V=0.4A
SATELLITE
HDMI
OUT
MONITOR
CONTROL
IR/AUTO
CONTRAST
PL 6
20