Bang & Olufsen BeoVision 4-85/103 - Manual (Page 6)

Automatic calibration
Approximately for every 100 hours of use, the
TV will initiate a calibration automatically, when
you press the standby button.
Manual calibration
The TV must be switched on for more than two
minutes and be in TV mode for the AUTO
COLOUR MANAGEMENT menu to be available.
We recommend that you let the TV perform calibration automatically instead of manually
Information
1 *Manual calibration
Calibration failed
Auto Colour Management ensures perfect colours on the screen continuosly.
During calibration, a sensor arm swings down from the TV frame and an on-screen
bar changes between various greyscale colours.
After manual calibration
Sensor arm retracts and TV returns to last chosen
source
CALIBRATION COMPLETE shortly appears on
screen
Bring up TV SETUP
menu
Select OPTIONS
menu
Activate AUTO
COLOUR
MANAGEMENT
Calibration process
begins* 1
Calibrate colour accuracy of the screen
All text is removed from the screen, the sensor arm swings down and the
calibration starts.
If the sensor arm does not swing down fully, the calibration is not performed
and the arm is retracted if needed. If the calibration was initiated automatically,
the TV will attempt to execute the calibration the next time it is switched off.
NOTE! Never switch off your system or
disconnect it from the mains during calibration.
6