Bang & Olufsen BeoVision 4-85/103 - Manual (Page 4)

Motorised stand
You can make different settings for your TV, such as favourite viewing and listening
positions if your TV is equipped with an optional motorised stand. During first-time
setup you are prompted to calibrate your stand.
Calibrate the stand
During first-time setup, the STAND ADJUSTMENT
menu appears. The motorised movement of the
TV will not work until the calibration process
has been completed.
Positions of the TV
Programme a position for when you watch TV,
listen to music, and when the TV is switched
off.
Information
Stand adjustment
1 *First-time setup
Remote control
Set the maximum angle the TV will turn – left and right.
During first-time setup, when you have calibrated the stand and set the TV positions,
press the green button to continue first-time setup.
The instructions in this Guide are based on the Beo5 remote control, but you can also
operate the TV with Beo4.
NOTE! For general information on daily
operation, see the BeoSystem Guide
enclosed with your TV.
At SET LEFTMOST POSITION
turn left to the point you wish
to restrict the movement to
At SET TOP POSITION tilt up
to the point you wish to
restrict the movement to
At SET RIGHTMOST POSITION
turn right to the point you wish
to restrict the movement to
At SET BOTTOM POSITION
tilt down to the point you wish
to restrict the movement to
Accept* 1
Accept* 1
Select VIDEO, AUDIO or
STANDBY
Turn/tilt TV as desired
STAND POSITIONS
VIDEO
AUDIO
STANDBY
STAND ADJUSTMENT
select
STAND ADJUSTMENT
SET LEFTMOST POSITION
SET RIGHTMOST POSITION
SET TOP POSITION
SET BOTTOM POSITION
turn turn
next
STAND ADJUSTMENT
STAND POSITIONS
4