Setting up the projector, Ceiling-mount setup, Side view standard setup (front projection) – Eiki EIP-2500 User Manual

Page 22

Ceiling-mount Setup

■ It is recommended that you use the optional

EIKI ceiling-mount bracket for this installation.
Before mounting the projector, contact your
nearest EIKI Authorized Dealer or Service
Center to obtain the recommended ceiling-
mount bracket (sold separately).

■ Invert the image by setting “Ceiling + Front”

in “PRJ Mode”. See page

for use of this

function.

Setting up the Projector

For optimal image quality, position the projector perpendicular to the screen with the projector’s feet
flat and level. Doing so will eliminate the need for Keystone correction and provide the best image
quality. (See page

Side View

Standard Setup (Front Projection)

■ Place the projector at the required distance from the screen according

to the desired picture size. (See page

Example of standard setup

Screen

Lens center

• Refer to page

for additional information concerning “Screen Size and Projection Distance”.

Note

This manual is related to the following products:

EIP-200