LeMond RevMaster Pro User Manual
Page 5
4. Tighten the M6x15 dome
screw to secure pin position.
5. Be sure that teeth are
fully engages to prevent the
y
g g
p
post handle pin from losing
its position.
6. Test clamping force by
p g
y
closing handle. The clamp
should be set strong enough
to hold the user’s weight,
yet be easy enough for all
users to close. Repeat
steps 1-6 until desired
clamp force is set.
NOTE: Proper adjustment
should require about 30-38
lbs of force to close handle.
Document # 300142
Revision 01
07/22/2008
Page 5