LeMond RevMaster Pro - Manual (Page 3)

Troubleshooting guide
Symptom Possible Cause Solution
Post slips down with handle
clamped down completely (0°)
Clamp force adjusted too light
Adjust (increase) clamp force
(see pages 4-5)
Troubleshooting guide
p p y ( ) ( p g )
Post slips down with handle
clamped down completely (0°)
Broken or missing post bearing
Replace post bearing
(see pages 8-9)
Post slips down and handle
will not close completely Clamp force adjusted too tight and
clamp is not locking down Adjust (decrease) clamp force
(see pages 4-5)
Handle feels rough to open Needs lubrication, excess wear on
Add grease, replace rough
parts as necessary (see
and close parts
parts as necessary (see
pages 6-7)
Grinding or squeaking sound
from handle during opening
and closing
Needs lubrication, excess wear on
parts
Add grease, replace rough
parts as necessary (see
pages 6-7)
Clamping assembly loosens
after several uses
Dome screw backs due to the post
handle pin being rough and Replace post handle pin, re-
grease and reassemble (see
after several uses
p g g
rotating with the handle.
g (
pages 6-7)
Document # 300142
Revision 01
07/22/2008
Page 3