Lanner FW-8750 - Manual (Page 33)

FW-8750
33
Lagacy USB Support: Enables support for legacy USB. AUTO option disable legacy
support if no USB devices are connected.
Configuration options: [Disable] [Enable] [Auto].
USB 2.0 Controller Mode: Configures the USB 2.0 controller in HiSpeed or
FullSpeed).
Configuration options: [FullSpeed] [HiSpeed].
4.4 Boot Menu
The Boot menu items allow you to change the system boot options. Select
an item then press to display the sub-menu.
Boot Setting Configuration: Press to enter the sub-menu and the
following screen appears:
Quick Boot :
Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS
performs all the POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo: This allows you to enable or disable the full screen logo display
feature.Configuration options: [Disabled] [Enabled]
Add On ROM Display Mode: Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current].