Lanner FW-8750 - Manual (Page 31)

FW-8750
31
Temperature 1 Limit of Start : Default set 60˚С. The FAN turns full speed in
which temperature
SYS/CPU FAN Speed, CPU Vcore, FBD_VCC,+3V,+5V, +12V,
FBD_VTT,-12V,5VSB,VBAT: These items display the current status of all of the
monitored hardware devices components such as CPU voltages, and all fans’
speeds.
AHCI Configuration: Press to enter the sub-menu and the following
screen appears:
AHCI Port0/1/2/3/4/5[Not Detected]: While entering setup, BIOS auto detects the
presence of IDE devices. This displays the status of auto detection of IDE device.
Remote Access Configuration:
Press to enter the sub-menu and enable
Remote Access then the following screen appears: