Lanner FW-8750 - Manual (Page 21)

FW-8750
21
2.2 Mechanical Overview
This section of the manual describes the mechanical and device
nomenclature of FW-8750..
2.2.1 Front View, LED Status and Behavior
Figure 4 － FW-8750 Front View
The following table provides description of each LED on the FW-8750 front panel.
• Console Port: The console port cable connects FW-8750 to the
host PC via. The Default baud rate is 115200
• LAN Connector: Require an Ethernet RJ-45 cable
• LCM & Keypad: Please reference the Appendix B
LED Color Status Description
Green
On Indicates when FW-8890 power is switched
ON PWR
N/A Off No power connected
Yellow On Hard disk is being accessed
HDD
N/A Off No Data is being accessed
Green On LAN is connected Ethernet Ports
Link/ACT Orange Flash Data is being accessed
Status Lanner Provide the Sample Codes（Please
reference the Driver/ Manual CD, under
“LED Status” for more information）
Key Pad
USB
Console
LED Status
LAN Connector