Installing a compactflash card, 3g sim card installation, Wireless 3g module installation – Lanner LEC-7105 User Manual
Page 19: Chapter 4, Introduction

19
Introduction
Chapter 4
Embedded and Industrial Computing
3G SIM Card Installation
Open the SIM tray and flip it diagnolly.
1.
Align the cut corner of the SIM card with the SIM card
2.
socket. Make sure the ICs is in contact with the reader.
Insert the
3.
SIM card into the tray diagonally. Close and
lock the tray.
Wireless 3G module Installation
Align the wireless module’s cutout with the Mini-PCIe
1.
slot notch.
Insert the wireless module into the connector
2.
diagnoally.
Push the other end of the wireless module to be
3.
tightened with the latch.
Note:
To remove the module from the system, release
1.
the latch first by slightly bending it inward.
To remove the SIM card, unlock the tray first by
2.
sliding it outward.
Installing a CompactFlash Card
LEC-7105 provides one CompactFlash slot. To install the
CF card, Follow these procedures bellow for installing a
CompactFlash card.
In order to insert the CF card, you will have to take off
1.
the front panel first. To take off the front panel, unscrew
the 2 screws on the front panel and the hex-shaped
screws of the COM ports.
Align CompactFlash card and the card slot with the
2.
arrow pointing toward the connector.
Push the card to insert into the connector.
3.
3
SIM Card
2
3G module
2
Unlock
lock
2
1
3
1