Lanner LEC-3010 - Manual (Page 20)

18
Bios Settings
Chapter 4
Embedded and Industrial Computing
Option Description
Auto Set this value to allow the BIOS to auto detect
hard disk drive support Use this setting if the
IDE disk drive support cannot be determined
This is the default setting
Disabled Set this value to prevent the BIOS from using the
SMART feature
Enabled Set this value to allow the BIOS to use the SMART
feature on support hard disk drives
32Bit Data Transfer
This option sets the 32-bit data transfer option The Load
Optimal default setting is Enabled
Option Description
Disabled Set this value to prevent the BIOS from
using 32-bit data transfers
Enabled Set this value to allow the BIOS to use 32-bit
data transfers on support hard disk drives
This is the default setting