Lanner LEC-3000A - Manual (Page 6)

4
Introduction
Chapter 1
Embedded and Industrial Computing
Top and Bottom Panel Features
R1 Reset Switch: A hardware reset switch
Use a pointed object to press it 5 seconds then release it to reset the system
without turning off the power
R2 Power Socket
Power supply through 1x2-pin Phoenix Contact with 12~36V dual power
source
R3 Digital Input/Output port:
The digital input/output (DIO) peripheral is provided through 10-pin terminal
block connector
Pin 2 to 5: Digital Inputs
Pin 7 to10: Digital Output
R4 CompactFlash Connector
One Type I / Type II CompactFlash card slot is provided by the system
R2
R4
1 2 3 4 5 6 7 8 9 1 0
- +
R1
R3