Lanner MR-320 - Manual (Page 6)

3
Introduction
Chapter 1
Network Application Platforms
Front Panel Features
F2 F1 F4 F5
F1 Power Led:
Green indicates that the system is powered on.
F2 Storage LED
It is an LED indicator (amber) for the CompactFlash card. If the LED is on, it indicates that the system’s storage is functional.
If it is off, it indicates that the system’s storage is not functional. If it is flashing, it indicates data access activities.
F3 Status
If the LED is green, it indicates that the system’s operational state is normal. If it is amber, it indicates that the system is
malfunctioning.
F4 Switch
These LEDs are indicators for the four ports of the switch module on the back panel.
Speed LED: If the LED is amber, it indicates that the connection speed is 1000Mbps. If the LED is green, it indicates that
the connection speed is 100Mbps. And if it is off, it indicates that the speed is 10Mbps.
Link/ACT LED: If the LED is on, it indicates that the port is active. If it blinks, it indicates that there is traffic.
F5 GbE-1/GbE-2
These LEDs are indicators for the two Gigabit Ethernet ports which can serve as WAN connections on the back panel. For
the LED behavior, refer to the above Speed and Link/ACT LED description of F4.
F3