Lanner 1U Rack Mount - Manual (Page 10)

Software User Manual Version 2.0
8
3.4 Mounting the outer rails to the rack
Use the following procedures to mount the outer rails to the rack.
1. Install the outer rail with the attached bracket to the front rack post by using two
countersink screws and conical washers (C).
2. Extend and adjust the rear bracket to meet the depth of the rack and secure it to the
rack post with two countersink screws and conical washers (C).
3. Repeat step 1 and 2 above to install the other rail to the other side of the rack.
4. You may use a wrench to tighten the nuts and the screws that attach the L-shaped
brackets to each of the rails.