Ion Science Corvus - Manual (Page 10)

CORVUS MANUAL Ion Science Ltd
Page 10 of 27 Unrivalled Detection. www.ionscience.com
CorvusPC
Stop logging
When pressed all Corvus connected to the group will stop logging.
Wireless (connected) Wireless (Disconnected)
This button offers access to the wireless diagnostic that shows the wireless network structure. The
icon on the button also indicates if connection is available on each Corvus.
Calibration
Accesses the calibration settings of that instrument
Upgrade
If the computer hosting CorvusPC has access to the internet software and firmware upgrades are
automatically downloaded to the computer. Pressing the Upgrade button updates both software and
firmware, simply follow the prompts.
Alternatively software and firmware can be downloaded from the Ion Science website:-
http://www.ionscience.com/customer-support/instrument-software
Master
Corvus instruments setup as a Master are identified by a red border around the Corvus icon
Slave
Corvus instruments that are slaves have no border.
USB
Indicates a Corvus is connected to CorvusPC via USB cable. Click on the USB symbol to eject the
USB before unplugging the cable from the Corvus or computer.
Serial number
The Corvus serial number is a unique 21 digit. The serial number cannot be modified
Push button (See location on page 3)
The Push button has just one function; to start and stop logging. Press and hold the push button on the
Master for 3 seconds to start the group logging. Press and hold the push button on the Master for 3 seconds
to stop the group logging. The Push button is relevant to the Master Corvus only, it has no use on Slave
Corvus.
Settings
This button gives access to the setup screen. Changes to settings are transmitted to all
Corvus in the group.