Yaskawa SmartTrac Digital - Manual (Page 16)

SMART TRAC AC1
10
••
The Smart Trac AC1 Digital Operator Engineer's Guide Smart Trac Digital Operator
Digital Operator Control Keys
Key Label Function
DATA/
ENTER
Moves to a submenu after selected with UP and DOWN arrow keys.
Writes a keyed parameter value into Smart Trac memory.
>RESET Moves blinking cursor of a value being changed one digit to the right if
modifying either a numeric parameter or the password. If at the right-
most position, wraps around to first position on left side of display.
OR
Resets a Smart Trac AC1 fault or fault history list.
up arrow Moves to a previous menu or submenu within a menu level. At the
topmost level of five menus, it moves from menu to menu in the
following order: Numeric Parameters, Special Functions, Logic
Feedbacks, Logic Parameters, and Numeric Feedbacks
down arrow Moves to the next menu or submenu within a menu level. At the
topmost level of five menus, it moves from menu to menu in the
following order: Numeric Parameters, Numeric Feedbacks, Logic
Parameters, Logic Feedbacks, and Special Functions.
Using the Digital Operator
You may use the Up and
Down arrow keys to move
from menu to menu or
submenu to submenu within a
menu level. When the Smart Trac AC1 is powered-up, the text window of the digital
operator displays the message "Press the MENU key now…". Each press of the
MENU key displays the next menu. There are five menus: Numeric
Feedbacks, Numeric Parameters, Logic Feedbacks, Logic
Parameters, and Special Functions. Each menu contains sub-menus.
1. To get familiar with the menu structure:
2. Press the MENU key. The first menu, Numeric Parameters, appears.
3. Press DATA/ENTER. You see the first numeric parameter, as
programmed.