Yaskawa V1000 NEMA Type 4X/IP66 - Manual (Page 40)

8 Cable Gland Selection
40 YASKAWA ELECTRIC TOBP C710606 35D YASKAWA AC Drive - V1000 NEMA Type 4X/IP66 Installation Manual
Note: Use 3-wire cable for single phase input, and 4-wire cable for 3-phase input.
Refer to the Electrical Installation chapter of the drive Quick Start Guide for proper main
circuit wiring type, gauge, tightening torque and procedures.
■ Cable Sleeve Selection (Asia)
The cable sleeves in Table 21 can be used if wire gauges are smaller than the diameter of the
cable glands. Cable sleeves are useful to prevent ingress of environmental contaminants
through the interior of the cable gland.
Table 21 Cable Sleeves
Three-
Phase
400 V
Class
4A0001G
22 22 22 10.5 to 12.5 SCL-14A 2.5 to 2.9 2.9 to 3.4 4A0002G
4A0004G
4A0005G
28 28 28 10.6 to 12 SC-4A 2.0 to 2.5 2.9 to 3.4
4A0007G
4A0009G
4A0011G
4A0018G
44 44 22 20.1 to 22 SC-6M 4.9 to 5.3 5.8 to 6.3
4A0023G
4A0031G
4A0038G
Compatible sleeve Outer Wiring Diameter mm
SC-6-1 ×16 16
SC-6-1 ×17 17
SC-6-1 ×18 18
SC-6-1 ×19
SCL-38-1 ×27-28.5
19
27 to 28.5
Voltage
Class
Model No.
CIMR-V†
Conduit
Hole Diameter
mm
Cable Gland (Seiwa)
Input
Holes
Output
Holes
Option
Holes
Appropriate
Wiring
Diameter
mm
Product
Number
Tightening Torque
N‚m
Body, Cap
Body,
Locknut