Yaskawa SI-W3 - Manual (Page 17)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 56A 1000-Series Option SI-W3 Installation Guide 17
2. With the front covers and digital operator removed, apply the LED label (E) in the
appropriate position on the drive top front cover (C).
Figure 4
Figure 4 Apply the LED Label
3. Make sure the screws on the left and right sides of the option terminal block (J) are
tightened with a tightening torque of 0.5 to 0.6 (N
x m) or 4.4 to 5.43 (inch-lbs), then
insert the option card (B) into the CN5-A connector (L) located on the drive and
fasten it using one of the included screws (H).
Figure 5
Figure 5 Insert the Option Card
ERR RUN
RX TX
C
E
NS MS
L
H
B
J
TOBP_C730600_56A_0_0_E.fm 17 ページ ２０１１年１１月２日 水曜日 午後６時１０分