Yaskawa Modbus TCP/IP SI-EM3D/V - Manual (Page 9)

2 Product Overview
u About this Product
This option provides a communications connection between the drive and a Modbus TCP/IP
network. The option connects the drive to a Modbus TCP/IP network and facilitates the
exchange of data.
This manual explains the handling, installation and specifications of this product.
The option is a communications link to connect industrial devices (such as smart motor
controllers, operator interfaces, and variable frequency drives) as well as control devices (such
as programmable controllers and computers) to a network. The option is a simple, networking
solution that reduces the cost and time to wire and install factory automation devices, while
providing interchangeability of like components from multiple vendors.
By installing the option to a drive, it is possible to do the following from a Modbus TCP/IP
master device:
• Operate the drive
• Monitor drive status
• Change drive parameter settings.
u Applicable Models
The option can be used with the drive models in Table 1 .
Table 1 Applicable Models
Drive Series Drive Model Number Software Version
<1>
V1000 CIMR-VooAoooo 1012 and later
<1> See “PRG” on the drive nameplate for the software version number.
2 Product Overview
YASKAWA TOEP YAICOM 17A V1000 Option Dual-Port Modbus TCP/IP SI-EM3D/V Installation Manual 9