Electrolux B5741-5 - Manual (Page 37)

37 Cleaning and Care
Cleaning the door glass panels
Clean the door glass panels thoroughly with a solution of water and washing up liquid.
Then dry them carefully.
Putting the door glass panels back.
1. From above insert the door glass panels one af-
ter the other into the door profile at the bot-
tom edge of the door at an angle and lower
them.
3 The two smaller panels first, then the larger
panel.
2. Take hold of the door trim (B) at each side, posi-
tion it on the inside edge of the door and plug
the door trim (B) into the upper edge of the
door.
3 On the open side of the door trim (B) there is a
guide bar (C). This must be pushed between the
outer door panel and the guide corner (D).
The clip seal (E) must be snapped in.