Electrolux B5741-5 User Manual
Page 32
Cleaning and Care
32
Pyrolytic cleaning
1
Warning: The oven gets extremely hot during this process. Young children must be kept
away.
1
Important! Before carrying out pyrolytic cleaning, all removable parts
including the side
rails, must be removed from the oven.
3
If you use the
oven shelf runners that are available as special accessories, these must
be removed
before pyrolytic cleaning.
If the side rails or oven shelf runners are still in place, ‘C1’ appears in the clock display.
The pyrolytic cleaning process then cannot be started due to a safety cut-out that pro-
tects the side rails/oven shelf runners.
Pyrolytic cleaning
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe menue .
–
“3:15” appears in the display,
–
Cook time flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
3
The Light does not work.
When a pre-set temperature is reached, the door is locked.
The bars of the heat indicator light up, until the door is unlocked again.
Changing the length of time for the pyrolytic cleaning
1. Proceed as described in the section “Pyrolytic cleaning”.
2. As long as Duration
is flashing, select the desired length for the process using or
:
“2:15” or “3:15”
Duration
flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
3
If Duration
is no longer flashing, press the Selection
button again and then per-
form the setting procedure.
Changing the switch-off time for the pyrolytic cleaning
The switch-off timecan be delayed using the clock function End
(within 2 minutes
of the pyrolytic cleaning starting).
When the different processes for pyrolytic cleaning are set:
P2 - 2:15 = Pyroluxe menue easy: For a light degree of soiling,
P1 - 3:15 = Pyroluxe menue intensive: For a high degree of soiling.