Yaskawa V1000-Series Option SI-EP3/V PROFINET - Manual (Page 27)

6 Procedure A
YASKAWA TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual 27
10.
On IP20/NEMA Type 1 enclosure drives, the screw for the drive ground terminal
also acts as one of the screws that attaches the NEMA Type 1 conduit bracket to
the drive. Reattach the NEMA Type 1 conduit bracket according to Figure 16 and
connect the drive-side of the ground wire to the drive ground terminal.
Figure 16
Figure 16 Reattach the NEMA Type 1 Conduit Bracket and Connect the Ground Wire
11.
Reattach the IP20/NEMA Type 1 bottom terminal cover according to Figure 17 .
Proceed to STEP 13.
Figure 17
Figure 17 Reattach the Bottom Cover IP20/NEMA Type 1
Ground terminal
Ground wire
Drive ground terminal/
located on NEMA Type 1
conduit bracket screw
Ground wire
Drive-side
ground terminal
ring lug
(size varies):
M3.5 to M6 Ring lug for
Option ground
FE
Size: M3
IP20/NEMA Type 1 Enclosure