Introduction – Yaskawa GPD 506/P5 Section One User Manual
Page 2
PP.P5G5.01.Troubleshoot
Page 2
Rev. 06/11/2003
Introduction
Section One is called “Checks Without Power”; it explains
the steps used to check out the inverter, with no power
applied, using an ohmmeter.
Section Two is called “Power Checks”; this section
explains a systematic method of applying power to the
inverter and checking various points on the inverter to
verify proper operation.
Section Three is called “Fault Codes”; this section
explains the fault indications, possible causes, and
corrective actions.
•
This document can also be used with GPD 505/P5 inverters, but some part numbers
may be different.
•
In this document, test and check point details pertaining to the GPD 506/P5 can also
be considered for the GPD 505/P5 unless otherwise noted.
•
Mfg. part numbers and YEA code numbers listed in this manual are subject to change.
This manual is divided into three sections: