Replacement filter, Part no, Heatsink filter kit option for f7 configured drive – Yaskawa F7 Configured Drive User Manual
Page 7
Yaskawa Electric America, Inc – www.drives.com
IG.F7C.01 Page 7 of 7
Date: 3/5/04
Heatsink Filter Kit Option
For F7 Configured Drive
Filter Replacement
Replacement filters can be ordered from Yaskawa Electric America using the following part numbers:
Applicable Drive Models
Heatsink Filter Kit
Part No.
F7CT
HP
Replacement Filter
Part No.
A003 3/4
A004 1
A006 2
A009 3
A015 5
B001 3/4
B002 1
B003 2
B004 3
B007 5
UFL00003-1
B011 7.5
UFL00002-1
A022 7.5
A028 10
B014 10
UFL00003-2
B021 15
UFL00002-2
A042 15
A054 20
B027 20
UFL00003-3
B034 25
UFL00002-3
(1) Loosen the (2) screws provided with each housing. Note that these screws are captivated and
should not be completely removed from the housing. Remove filter housing from filter duct.
(2) Remove filter material from metal filter housing. Replace with new filter material according to
Replacement Filter Part No. table provided above.
(3)
Reattach filter housing to filter duct using the (2) captivated screws provided with each housing.
The housing has a clearance slot that must be properly aligned with the exposed screw on the
back of the enclosure. See Figure 6 for diagram.