Yaskawa F7 Configured Drive - Manual (Page 5)

Yaskawa Electric America, Inc – www.drives.com
IG.F7C.01 Page 5 of 7
Date: 3/5/04
Heatsink Filter Kit Option
For F7 Configured Drive
Refer to Figure 5 – Securing the duct
(8) Using the (4) #10-32 screws provided, attach the duct to the enclosure’s mounting leg. Do not completely
tighten these screws.
(9) Using the (2) #8-32 screws provided, attach the duct to the enclosure through the available back panel holes
where screws were removed from earlier (see Step 4).
(10) Tighten all #8-32 screws to 18 in.lb., and all #10-32 screws to 30 in.lb.
Attach duct
internally using (2)
#8-32 screws
Attach duct to
mounting leg using
(4) #10-32 screws
Figure 5 – Securing the Duct (Cutaway shown for detail)