Yaskawa GPD515C-XXXX-CS006 - Manual

For GPD515 Adjustable Frequency Drives
Change 0 4/18/97 Page 1 of 6 Doc. No. 02Y00025-0422
Change 1 9/19/00
Traverse Control
FLASH Memory Software Option
Part Number: GPD515C-XXXX-CS006 (1)
With this factory-installed FLASH software, the
GPD515 has the ability to modulate the output
frequency around the set frequency reference.
This function provides an evenly wound roll for
those winding applications that would
experience localized build-ups without this
feature. The terms disturb, p-jump, ribbon
break and wobbulator are also used to
describe this function. Specifications:
• P-Jump Function / Inertia Compensation
• P-Jump ON/OFF Select
• P-Jump Limit
• Adjustable Duty Cycle
• Sawtooth Waveform Generation / Ribbon
Break
• Percent Trim Adjustment
• Independent P-Jump Adjustment
• Independent Accel/Decel Times
• Control Mode: P-Jump in V/f only
• Serial Communications: DeviceNet,
Profibus, Modbus Plus, Modbus RTU.
This document is an addendum to Technical
Manual TM4515, listing the effect of this soft-
ware on the parameters in the drive and
function descriptions in the manual.
(1) XXXX refers to the base Model Number of
the drive in which the software is installed.