Yaskawa GPD515C-XXXX-CS009 - Manual

| Change | 1 | STD-7209 | 4/22/97 | Page 1 of 3 Doc. No. 02Y00025-0425
With this factory-installed FLASH software, the
GPD 515 has the ability to provide the dynamic
braking function, even when the drive is not
running. This software is effective only with
GPD 515 drives that have a built-in braking tran-
sistor. Specifications:
• Available For:
GPD515C-A003 to GPD515C-A033
GPD515C-B001 to GPD515C-B034
• Control Modes: V/f, Open Loop Vector and
Flux Vector
• Serial Communications: Modbus RTU
(RS-232)
This document is an addendum to Technical
Manual TM 4515, listing the effect of this soft-
ware on the parameters in the drive and func-
tion descriptions in the manual.
For GPD 515 Adjustable Frequency Drives
Continuous Dynamic Braking
FLASH Memory Software Option
Part Number: GPD515C-XXXX-CS009 (1)
(1) XXXX refers to the base Model Number of
the drive in which the software is installed.
GPD
515
STOP
RUN
Speed
Reference
AC Motor