Yaskawa E7B Drive Bypass System - Manual (Page 29)

Yaskawa Electric America, Inc.
Installation Guide IG.E7B.02 Rev: 04-11
Date: 11-1-04 Page 27 of 46
Drive Main Menus
The Drive’s parameters and monitoring functions are organized into groups called menus that make it easier to read
and set parameters. The Drive is equipped with five menus. The five menus and their primary functions are shown in
Table 1.30 and are directly available by pressing the MENU key.
Table 1.30 Drive Main Menus
Main Menu Primary Function(s)
- DRIVE -
Operation
The Drive can be run in this menu. Also called the “Monitor” menu.
Use this menu for monitoring values such as frequency reference or output current, displaying fault
history or displaying the fault traces.
- QUICK -
Quick Setting
The Drive can be programmed in this menu.
Use this menu to set/read the most commonly used parameters.
- ADV -
Programming
The Drive can be programmed in this menu.
Use this menu to set/read every parameter.
- VERIFY -
Modified Constants
(Parameters)
The Drive can be programmed in this menu.
Use this menu to set/read the parameters that have been modified from their factory default settings.
- A.TUNE -
Auto-Tuning
For Bypass units Auto-Tuning can only be accomplished through the DriveWizard software
(Part Number DWST616-C2). A free download from www.drives.com.
The Drive can be programmed in this menu.
Auto-tune the Drive in order to utilize the bi-directional speed search feature.