Yaskawa E7B Drive Bypass System - Manual (Page 23)

Yaskawa Electric America, Inc.
Installation Guide IG.E7B.02 Rev: 04-11
Date: 11-1-04 Page 21 of 46
Drive Run Indicator
The status of the “RUN” indicator is shown in Table 1.16 when the Drive is either in the “Hand” or “Auto” mode.
Drive Stop Indicator
The status of the “STOP” indicator is shown in Table 1.17 when the Drive is either in the “Hand” or “Auto” mode.
The relationship between the indicators for RUN and STOP and the Drive status is shown in Fig. 1.10.
Fig 1.10 RUN and STOP Indicators
Table 1.16 RUN Indicator
Indicator Status Description
On (Red) Drive is running
Blinking (Red) Drive is decelerating to a stop
Off Drive is stopped
Table 1.17 STOP Indicator
Indicator Status Description
On (Red) Drive is decelerating to a stop or stopped
Blinking (Red) Drive is in a run condition but the speed command is zero
Off Drive is running
RUN STOP