England's Stove Works 10-CDV - Manual (Page 19)

Finish
This new unit has been painted with High-Temperature Paint that should retain its original look
for years. If the unit should get wet and rust spots appear, the spots can be sanded with plain steel
wool and repainted. We recommend this paint, as others may not adhere to the surface or withstand
the high temperatures.
Glass
This unit has a ceramic glass (Part # AC-G10, comes with gasket) in the viewing door. Surface
scratches are acceptable, but if this glass becomes cracked in any area, the unit should be shut
down and the window replaced with this high-temperature ceramic glass.
Auger Removal and Replacement
To remove the auger from the unit, you will first need to make sure that the unit has been shut
down, unplugged and is cold.
IMPORTANT: Before removing the auger you will also need to remove any fuel that is in the
hopper, including any sawdust or fines. Using a pair of regular pliers, simply grab
the front part of the auger and pull forward.
To reinstall the auger, put the “notched” end of the auger into the tube and rotate clockwise until
you feel the auger lock.
Illustration 3
19