SMA WB 5000-US - Manual (Page 2)

SMA America, LLC Electrical connection
Addendum operating requirements DBWB50-80US-UUS113611 2/12
Figure 1: Concept of a wind turbine system using this Windy Boy
When designing the wind turbine system, ensure that the values comply with the permitted operating
range of all components at all times.
The manufacturer of the wind turbine must have approved the turbine for use with the Windy Boy.
2 Electrical connection
2.1 Safety precautions
Risk of electric shock due to high voltages inside the Windy Boy.
Death or serious injuries will result.
• All work on the Windy Boy must only be carried out by qualified personnel.
• All work on the Windy Boy must only be done as described in this manual.
• Pay attention to all safety instructions.
Electrostatic discharges possible when components are touched.
Damage to components will result.
• Follow ESD protective provisions.
• Remove existing electrostatic charges by touching a grounded metal surface
(e.g. housing).