Electrolux 65011 VI - Manual (Page 26)

Interrupt a washing programme in progress
• Open the dishwasher door; the programme will stop. Close the door; the pro-
gramme will start from the point at which it was interrupted.
End of the washing programme
• The dishwasher will automatically stop and an audible signal informs you of the
end of the washing programme.
• When the washing programme has ended, the optical signal on the floor beneath
the dishwasher's door will turn off.
1. Open the dishwasher door.
The indicator light of the programme just ended remains illuminated.
2. Switch off the dishwasher by pressing the On/Off button.
3. Leave the dishwasher door ajar and wait a few minutes before removing the
dishes; in this way they will be cooler and the drying will be improved.
When the washing programme has finished, it is recommended that the
dishwasher is unplugged and the water tap turned off.
Unloading the dishwasher
• Hot dishes are sensitive to knocks.
The dishes should therefore be allowed to cool down before removing from the
appliance.
• Empty the lower basket first and then the upper one; this will avoid water drip-
ping from the upper basket onto the dishes in the lower one.
• Water may appear on the sides and the door of the dishwasher as the stainless
steel will eventually become cooler than the dishes.
CAUTION!
When the washing programme has finished, it is recommended that the dishwasher
is unplugged and the water tap turned off.
26 Unloading the dishwasher