Electrolux 65011 VI - Manual (Page 25)

4. Press the button corresponding to the required programme (see "Washing
programmes" chart). Close the dishwasher door, the programme starts
automatically.
Setting and starting the programme with delay start
1. After having selected the washing programme, press the delay start button
until the number of hours for the delay start appear in the digital display. The
start of the selected washing programme can be delayed for between 1 and 19
hours.
2. Close the dishwasher door, the countdown starts automatically.
3. The countdown will decrease with steps of 1 hour.
4. The opening of the door will interrupt the countdown. Close the door; the
countdown will continue from the point at which it was interrupted.
5. Once the delay start has elapsed the programme will start automatically.
Once the washing programme has started, a point-shaped optical signal appears
on the floor beneath the dishwasher's door.
This optical signal will remain illuminated for all the duration of the washing pro-
gramme.
If the appliance has been installed higher up with a furniture door mounted flush,
the optical signal will be no longer visible.
WARNING!
Interrupt or cancel a washing programme in progress ONLY if it’s absolutely
necessary. Attention! Hot steam may escape when the door is opened. Open
the door carefully.
Cancelling a delay start or a washing programme in progress
• Simultaneously press and hold the two programme buttons positioned over the
word RESET , until all the programme button lights will illuminate.
• Cancelling a delay start involves also the cancelling of the washing programme
set. In this case you have to set the washing programme again.
• If a new washing programme is to be selected, check that there is detergent in
the detergent dispenser.
Select and start a washing programme 25