SMA SMC 4600A - Manual (Page 12)

Display SMA Solar Technology AG
12 SMC46-60A-BA-BEN114230 User Manual
4 Display
4.1 Operation
The display shows the current values of your plant. The displayed values are updated every
5 seconds.
You can operate the display by tapping the enclosure lid.
Single tap:
The background illumination switches on or the display scrolls one message further.
2 taps in quick succession (valid from firmware version 2.15):
The inverter displays the device type, the firmware version, the configured country setting one after
the other, and the configuration of the SMA Power Balancer.
4.2 Display Messages during Operation
After commissioning, the inverter displays the device type, the firmware version, the configured
country standard one after the other, and the configuration of the SMA Power Balancer. If you want
to view the display messages of the startup phase again while in normal operation, double tap the
enclosure lid (from firmware version 2.15).
Display message Description
Inverter device type
Firmware version of internal processors
Configured country standard of inverter
(example: "GER/VDE0126‑1‑1")
Configuration of the SMA Power Balancer
(Example: "PowerGuard")
SMC xxx
Wrxxx
PowerBalancer
PowerGuard