I3.8, I3.9, Table 4 – Electrolux 534074 User Manual
Page 37
ENGLI
S
H
39
The accessory functions that can be activated are:
Table 4 Accessory functions
After selecting the required accessory function, it can be
started by pressing the confirm key (“R” Table 2).
When an accessory function is being performed, the
message corresponding to the function selected (see
Table 4 “Accessory functions”) flashes.
When an accessory function has ended, the dishwasher
emits three acoustic signals; the display shows the mes-
sage corresponding to the function selected and the
message "
END
" appears on the third line.
For example:
It is now possible to:
-
switch the machine off by pressing the On/Off key
(“A” - Table 2)
-
quit the accessory functions mode and restart tank
filling by pressing the accessory functions key (“M” -
Table 2)
I3.7
Door open
When one or more doors are open, the indicator “T”
(Table 2) flashes and the display shows:
-
dOOr
(“F” - Table 2)
-
OPEn
(“G” - Table 2)
- number corresponding to the module with door
open (“G” - Table 2)
2
: wash + rinse module
3
: prewash module
Close all open doors and restore normal dishwasher
operation.
I3.8
Emergency stop
When the emergency mushroom push button is acti-
vated, the dishwasher emits an acoustic signal, the dis-
play shows
Deactivate the emergency mushroom push button to
restore normal dishwasher operation, following that
given in par. E10.4 “Emergency stop reinstatement”.
I3.9
General alarm
When the dishwasher has a general anomaly it emits an
acoustic signal, the display shows:
-
ALr
(Alarm) (“F” - Table 2)
- alarm code (“G” - Table 2).
Function
Description
Display
DRAIN TANKS
Complete emptying
of all machine tanks.
drn
ALL
DRAIN PREWASH
Complete emptying
of prewash tanks (if
present in machine).
drn
PrE
DRAIN WASH
Complete emptying
of wash tank.
drn
tAn
DRAIN & CLEAN
Cleaning inside
machine and
complete emptying of
all tanks.
drn
CLE
DRAIN AIR GAP
Complete emptying
of air gap.
drn
AIG
SANITIZATION
(optional)
Complete emptying
of all machine tanks
and refilling of tanks
with clean water.
Heating of water up
to 75°C/167°F and
wash for 1 minute,
then complete
emptying of tanks.
SAn