SMA SC 9000TL - Manual (Page 12)

Display SMA Solar Technology AG
12 SMC9-11TLRP-BA-BEN111320 User Manual
4 Display
4.1 Operation
The display shows the current values of your plant. The displayed values are updated every 5
seconds.
You can operate the display by tapping.
Tap once:
The background illumination switches on or the display scrolls one message further.
4.2 Display Messages during Operation
Upon error-free connection of the inverter to the power distribution grid, after approximately one
minute, the display starts alternating between the messages shown below. Each message appears for
5 seconds, and then the cycle restarts from the beginning.
Display message Description
Energy generated on the current day
Status message "MPP"
Current feed-in power
Voltage of the PV array
In Sunny Mini Centrals with Reactive Power Control,
the current reactive power value Qac and the
displacement factor cos φ (PF) are displayed after a
further 5 seconds or when you tap again.
Energy produced so far
Total number of operating hours in feed-in operation
E-today 0Wh
Mode MPP