Energizer MMT-511 - Manual (Page 33)

Getting Started 21
10. The time and date will be shown.
11. Press the ACT button to return to the UTILITIES menu.
Installing the reservoir
If using the pump for the first time, remove the shipping cap from
the reservoir compartment before installing the reservoir.
To install a reservoir into your pump or replace an empty reservoir
you will access the PRIME menu to rewind the pump. The pump
will prompt you through the following steps:
■ Remove empty reservoir
■ Rewind — moves the drive arm back to the starting point
inside the reservoir compartment, so a new reservoir can be
installed.
■ Install new reservoir
■ Select insulin type
■ Preparing to prime — pump finds the back of reservoir.
■ Manual prime
■ Insert set into body
■ Fixed prime
The following procedures must be followed in order. The pump
will prompt you through these procedures.
MiniMed
TIME SET AT
10:12 PM
18NOV2001