SMA DC Disconnect Switch For SB 3300-U - Manual (Page 22)

Installation SMA America, Inc.
16 DC-Discon-U-11:SE4406 Installation Guide
15 The shaft of the
switch should
protrude from the
center of the
switch housing as
shown, once the
cover is in place.
16 Place the handle
of the switch onto
the shaft and
align the hole in
the handle with
the hole in the
shaft. Insert the
screw and tighten
using the
supplied 2.5 mm
Allen wrench.
(Switch must be in
OFF (0) position
to access the
mounting screw.)