SMA FLX Series GSM Option Kit - Manual (Page 9)

2.3.3 Data Warehouse [0] [Plant] /FTP Server
Upload
Illustration 2.3 Data Warehouse
Item Description
Upload time [0] Time of day for upload, used only when upload
interval is configured to 'daily'.
Upload
interval [0]
Hourly
Daily
Weekly
Monthly
Disabled
FTP server
address [1]
The FTP server address is user configurable as
a name or IP address. Enter maximum 24
characters.
FTP server
port [1]
Default port is 21.
FTP mode [1] Default mode is ‘Active’.
FTP server
username [0]
Enter the username needed for the FTP/data
warehouse account.
If empty, the serial number of the inverter is
used. Enter maximum 24 characters.
Password [0] The password for the FTP/web portal account.
Enter maximum 24 characters.
Start log
upload now [0]
Tests the FTP upload immediately. To check
status go to [Plant
→ Status → Upload status].
NOTICE
A prerequisite for a successful data transfer to the data
warehouse is a valid and active portal account. Receive
further details directly from the data warehouse/web
portal provider.
To register the inverter at a data warehouse provider, use
the final 10 digits of the master inverter serial number.
Find the serial number here: [Inverter level: Status
→
Inverter], or on the product label on the side of the
inverter.
Setup
8 L00410627-03_2q / Rev. date: 2014-06-20
2 2