EVGA NFORCE 650I - Manual (Page 40)

Hardware Installation
29
The following items on the CMOS Setup Utility main menu are commands
rather than submenus:
‰ Load Defaults
Load default system settings.
‰ Set Password
Use this command to set, change, and disable the password used to access the
BIOS menu.
‰ Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
‰ Exit Without Saving
Use this command to abandon all setting changes and exit setup.
The following two items on the CMOS Setup Utility main menu are status
indicators: