Emerson Radio RP6289 - Manual (Page 3)

2
BULB REPLACEMENT
Replacing The Flashlight Bulb
This radio/flashlight is supplied with a replacement bulb assembly that was included
in the packaging.
Remove the bulb assembly from the packaging and store it in a safe place for
future use. If the flashlight no longer works, but the radio is working and the
batteries are good, the bulb has probably burned out and needs to be replaced.
To replace the bulb assembly, rotate
the bulb cover ‘counter-clockwise’ to
remove it, then tilt the radio and the
bulb assembly will slide out of the
cabinet.
Insert the new bulb assembly in the
cabinet, replace the bulb cover and rotate
it ‘clockwise’ to tighten.
IMPORTANT NOTES
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Note:
The manufacturer is not responsible for any radio or TV interference cuased by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
RP6289_030504.p65 5/3/2004, 11:02 2