Electrolux EHD90LLUM - Manual (Page 11)

Control panel Display
Switch on Touch
Switch off Touch
Touch
If the power boost function has ended,
the cooking zones automatically
switch back to the heat setting set
previously.
Power management
The cooking zones of the cooking surface
have a maximum power available to them.
Two cooking zones make up a pair
(see figure). So that the power boost
function can always be carried out, power
management may reduce the power of the
other cooking zone in the pair.
Example: heat setting 9 is selected on a
cooking zone. The power boost function
is switched on for the cooking zone paired
up with it. The power boost function is
performed, but heat setting 9 on one
cooking zone and power boost function on
the other cooking zone of a pair exceeds
the maximum output for both. Therefore
power management reduces the first
cooking zone that was switched on from 9
to 7, for example, and the display for this
cooking zone alternates between 9 and 7
and then remains on the current maximum
of 7. (Whether the display alternates
between 9 and 7 or 9 and 6 or other values,
depends on the appliance type and the size
of the cooking zone.)
Switching the power boost function on and off
The power boost function makes more
power available to the induction cooking
zones, e.g. to bring a large quantity of
water to the boil quickly.
The power boost function is activated for
8 minutes for the front left cooking zone,
for 2 minutes for the rear left cooking zone
and for 5 minutes for the right cooking
zones. After these times, the induction
cooking zones automatically switch back
to heat setting 9.
electrolux induction cooktop switching the power function on and off 7