Polaris 2015 Polaris M1400 - Manual (Page 26)

24
FEATURES AND CONTROLS
Instrument Cluster
High water pressure may
damage components. Wash the
vehicle by hand or with a
garden hose using mild soap.
Do not use alcohol to clean the
instrument cluster. Do not
allow insect sprays to contact
the lens.
Speedometer
The speedometer displays
vehicle speed in either miles
per hour (MPH) or kilometers
per hour (km/h). See page 26.
Indicator Lamps
Lamp Indicates Condition
Vehicle Speed
When standard mode is selected, speed displays in miles per hour.
When metric mode is selected, speed displays in kilometers per hour.
Over Temperature This lamp illuminates to indicate an overheated engine. If the
indicator flashes, the overheating condition remains, and the system
will automatically reduce engine power.
Neutral This lamp illuminates when the transmission is in neutral and the
ignition key is in the ON position.
High Beam This lamp illuminates when the headlamp switch is set to high beam.
Helmet/Seat Belt The lamp is a reminder to the operator to ensure all riders are
wearing personal protective equipment and seat belts before
operating. The driver's seat belt is equipped with a seat belt interlock.
Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is
not secured.
Check Engine This indicator appears if an EFI-related fault occurs. Do not operate
the vehicle if this warning appears. Serious engine damage could
result. See your dealer.
Rider
Information
Center
Speedometer
Indicator
Lamps
MODE
Button