beautypg.com

What to do if, Installation – Electrolux 30006VE User Manual

Page 24

background image

Put a cloth on the bottom of the oven for protection of the oven light and glass cover.

Replacing the oven light bulb/cleaning the glass cover
1. Turn the glass cover anti-clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb.
4. Install the glass cover.

WHAT TO DO IF…

Problem

Possible cause

Remedy

The residual heat indicators

does not come on

The cooking zone is not hot be-

cause it operated only for a

short time

If the cooking zone must be

hot, speak to the after sales

service

The appliance does not operate The fuse in the fuse box is re-

leased

Control the fuse. If the fuse is

released more than one time,

refer to a qualified electrician.

The oven does not heat up

The oven is not switched on

Switch on the oven

The oven does not heat up

The necessary settings are not

set

Control the settings

The oven lamp does not oper-

ate

The oven lamp is defective

Replace the oven lamp

Steam and condensation settle

on the food and in the oven

cavity

You left the dish in the oven

for too long

Do not leave the dishes in the

oven for longer than 15-20 mi-

nutes after the cooking process

ends

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the oven cavity.

We recommend that you write the data here:
Model (MOD.)

.........................................

Product number (PNC)

.........................................

Serial number (S.N.)

.........................................

INSTALLATION

First read "Safety information" chapter carefully.

24

What to do if…