Warning – Polaris 2013 BRUTUS Operators Handbook User Manual
Page 6

9924342
6
DAILY INSPECTION
•
Check seat belts and replace if damaged.
•
Check ROPS / OPS structure and fasteners.
•
Safety Signs (Decals). Replace if damaged.
•
Frame fasteners - Inspect and insure tightness.
•
Clean engine of flammable material.
•
Clean pedals and operator’s area.
•
Check engine oil level, fuel level, hydraulic fluid level, brake fluid level, engine
coolant level and engine air filter and pre-filter.
•
Check tire condition, tire pressure and wheel fasteners for proper torque.
•
Check the travel control system, brake system, engine speed control system
and pedal travel.
•
Check the front suspension, the rear suspension and steering.
•
Check the headlights, taillights, indicator lights and switches.
•
Check PTO shaft splines, guards and shields. Replace if damaged or missing.
See Owner’s Manual for complete daily check list and maintenance procedures.
WARNING
Use the ROPS / OPS structure which is a Rollover Protective Structure /
Occupant Protective Structure, designed for the Utility Vehicle. ROPS / OPS
structure modifications not approved can cause loss of operator protection
and result in serious injury or death. Always fasten seat belt when operating.
WARNING
Never use the machine in an atmosphere with explosive dust or gases or
where exhaust can contact flammable material. Explosion or fire can result.
AVOID INJURY OR DEATH