Maintenance, Drive chain tension – Polaris 2013 600 Switchback User Manual
Page 99
95
MAINTENANCE
Drive Chain Tension
Check drive chain tension at the intervals outlined in the maintenance
charts beginning on page 81 and before each long trip.
1. Remove the side panels.
2. Rotate the driven clutch coun-
ter-clockwise to move all
chain slack to the tensioner
side. Lock the brake lever
lock, or have an assistant hold
the brake lever firmly.
3. Loosen the adjuster bolt jam
nut.
4. Finger tighten the adjuster bolt
until it can no longer be
adjusted by hand, then back
off 1/4 turn.
5. Tighten the jam nut while
holding the adjuster bolt.
Torque to 21 ft. lbs. (28 Nm).
6. Reinstall the side panels.
7. Release the brake lever lock.
Jam
Nut
Adjuster
Bolt
This manual is related to the following products:
- 2013 600 Switchback Pro-R 2013 600 Switchback Adventure 2013 800 Switchback 2013 800 Switchback Pro-R 2013 800 Switchback Pro-R Adventure 2014 600 Rush Pro-R 2014 800 Rush Pro-R 2013 600 Rush 2013 600 Rush Pro-R 2013 800 Rush 2013 800 Rush Pro-R 2011 600 Rush 2011 800 Rush 2012 600 Rush 2012 600 Rush Pro-R 2012 800 Rush 2012 800 Rush Pro-R 2012 600 Switchback 2012 600 Switchback Pro-R 2012 600 Switchback Adventure 2012 800 Switchback 2012 800 Switchback Pro-R 2014 600 Switchback 2014 600 Switchback Pro-R 2014 600 Switchback Adventure 2014 800 Switchback 2014 800 Switchback Pro-R 2014 800 Switchback Pro-R Adventure 2014 600 Indy Voyager 600 RUSH IQ Shift 600 2016 550 Indy 2010 120 Dragon 2015 550 Indy Adventure 155 2015 550 Indy Voyageur 155 2015 550 Indy 2010 Trail Touring 2016 550 Indy 144 2016 550 Indy LXT 144 2016 550 Indy Adventure 144 2016 550 Indy Adventure 155 2016 550 Indy Voyageur 144 2016 550 Indy Voyageur 155 2015 550 Indy 144 2015 550 Indy LXT 2015 550 Indy Adventure 2015 550 Indy Voyageur 2014 550 Indy 144 2014 550 Indy LXT 2014 550 Indy Adventure 2014 550 Indy Voyager 2013 550 IQ Shift 2013 550 IQ 136 2013 550 IQ LXT 2016 600 Indy 2016 600 Indy SP 2016 800 Indy SP