Maintenance, Clutch system – Polaris 2013 600 Switchback User Manual
Page 105
101
MAINTENANCE
Clutch System
Drive Belt Condition
Periodically check the condition and tension of the drive belt. Inspect
the belt for signs of excessive wear: frayed edges, missing cogs, cracks
and excessive looseness. Replace the belt if any of these conditions
exist. See Drive Belt Troubleshooting on page 121.
Always carry a spare drive
belt. Store the spare belt in
the belt clip located under
the left side of the hood.
Make sure the o-ring is
installed over the belt clip.
For improved drive-away during extremely cold temperatures, remove
the belt and warm it to room temperature. Reinstall it before starting the
snowmobile.
O-Ring
This manual is related to the following products:
- 2013 600 Switchback Pro-R 2013 600 Switchback Adventure 2013 800 Switchback 2013 800 Switchback Pro-R 2013 800 Switchback Pro-R Adventure 2014 600 Rush Pro-R 2014 800 Rush Pro-R 2013 600 Rush 2013 600 Rush Pro-R 2013 800 Rush 2013 800 Rush Pro-R 2011 600 Rush 2011 800 Rush 2012 600 Rush 2012 600 Rush Pro-R 2012 800 Rush 2012 800 Rush Pro-R 2012 600 Switchback 2012 600 Switchback Pro-R 2012 600 Switchback Adventure 2012 800 Switchback 2012 800 Switchback Pro-R 2014 600 Switchback 2014 600 Switchback Pro-R 2014 600 Switchback Adventure 2014 800 Switchback 2014 800 Switchback Pro-R 2014 800 Switchback Pro-R Adventure 2014 600 Indy Voyager 600 RUSH IQ Shift 600 2016 550 Indy 2010 120 Dragon 2015 550 Indy Adventure 155 2015 550 Indy Voyageur 155 2015 550 Indy 2010 Trail Touring 2016 550 Indy 144 2016 550 Indy LXT 144 2016 550 Indy Adventure 144 2016 550 Indy Adventure 155 2016 550 Indy Voyageur 144 2016 550 Indy Voyageur 155 2015 550 Indy 144 2015 550 Indy LXT 2015 550 Indy Adventure 2015 550 Indy Voyageur 2014 550 Indy 144 2014 550 Indy LXT 2014 550 Indy Adventure 2014 550 Indy Voyager 2013 550 IQ Shift 2013 550 IQ 136 2013 550 IQ LXT 2016 600 Indy 2016 600 Indy SP 2016 800 Indy SP